TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
4. Clean face of the brake pad with sandpaper.
5. Clean all grooves with a suitable workshop hand tool.
6. Slightly chamfer edges of brake pads with a file.
Brake caliper, cleaning
Note:
The following steps require a thin coat of Plastilube Moly3(R) high temperature grease to be applied to various parts of the brakes. This grease must
never come in contact with:
^ The braking surface of the brake pads or brake discs.
^ The caliper piston.
These areas must always be free of grease.