TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Pull both guide pins out of brake caliper and bushings.
Installing
Installation is reverse of removal, with special attention to the following:
-
Remove brake pedal loading device (V.A.G 1869/2 ).
-
Install brake pads => [ Front Brake Pads ] See: Disc Brake System/Brake Pad/Service and Repair/Front Brake Pads.
Only push back brake piston when inserting new brake pads. => [ Front Brake Caliper, Pressing Back Piston ] See: Procedures/Front Brake
Caliper, Pressing Back Piston.
-
Brake System: ABS/ESP Mark 60, bleeding => [ Brake System Bleeding ] See: Brake Bleeding/Service and Repair/Brake System Bleeding.
-
Tighten brake caliper on brake carrier with both guide bolts. Note tightening specification:
-
Close bleeder valve.
-
Connect brake line to brake caliper. Note tightening specification: => [ Brake Hose Connection with Anti-Rotation Device ] See: Disc Brake
System/Service and Repair/Front Brakes Assembly Overview
-
Brake System: ABS/ESP Mark 60, bleeding => [ Brake System Bleeding ] See: Brake Bleeding/Service and Repair/Brake System Bleeding.
-
Mount wheels => Wheels and Tires Guide 44 Specifications