TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
After-Run Coolant Pump: Service and Repair
After-Run Coolant Pump
After-Run Coolant Pump
Special tools, testers and auxiliary items required
‹› Hose Clamps Up To 25 Mm Diameter (3094)
Removing
-
Remove front noise insulation. Refer to - 1 -
-
Disconnect electrical connector - 1 -.
‹› Lay a cloth below to catch escaping coolant.
-
Clamp off coolant hoses - arrow - with hose clamps hose clamps up to 25 mm diameter (3094) and remove.
-
Remove bolt - 3 - and the after-run coolant pump.
‹› Ignore - 2 and 4 -.
Installing
‹› For tightening specifications, refer to => [ After-Run Coolant Pump Assembly Overview ] See: After-Run Coolant Pump Assembly Overview.