TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-375005.png)
-
Remove camshaft adjuster bolt and remove the camshaft adjuster with the drive chain.
Installing
‹› For tightening specifications, refer to => [ Valvetrain Assembly Overview ] See: Camshaft, Lifters and Push Rods/Service and Repair/Valvetrain
Assembly Overview
‹› The camshafts are secured with camshaft clamp (T10252 )
‹› Replace the camshaft adjuster bolt.
-
Place drive chain on the camshaft adjuster.
-
Hold camshaft adjuster in front of the exhaust camshaft as follows: