TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Assembly Overview, => [ Balance Shaft Housing Tightening Specifications
and Sequence ] See: Balance Shaft Module With Oil Pump Assembly Overview
‹› Replace bolts which have been tightened to torque.
‹› Replace balance shaft assembly bolt gasket => [ (Item 13) Bolt ] See: Balance Shaft Module With Oil Pump Assembly Overview.
-
Tension the chain tensioner if necessary:
-
Tension pistons by hand - arrow -.
-
Press chain rail in direction of - arrow - and secure with the 3 mm hex socket wrench - 1 -.
-
Position intermediate plat on the balance shaft module alignment sleeves - arrows - as illustrated.