TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-405004.png)
‹› Thickness of sealant bead: 2 to 3 mm.
-
Lightly coat lower sealing surface - shaded - on sealing flange with sealant.
‹› The sealing flange must be installed within 5 minutes after applying the sealant.
-
Carefully push the sealing flange onto the pins on the cylinder block.
‹› To install the sealing flange with installed seal, use guide sleeve (T10053/1).
-
Tighten sealing flange. Refer to => [ Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications and Sequence ] See: Drive Belts, Mounts,
Brackets and Accessories/Drive Belt/Service and Repair/Sealing Flange, Ribbed Belt Side Assembly Overview
