TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
![background image](/audi/tts_quattro_roadster/l4-2.0l_turbo_(cdma)/Page-458003.png)
Both Sides
-
Press installation cartridge down with the pressure fork.
-
At the same time, rotate installation cartridge knurled screw right until points engage in valve keeper.
-
Move knurled bolt to the left and right.
‹› Valve keepers are pressed against each other and capture in the installation cartridge.
-
Release pressure fork.
-
Remove installation cartridge.
-
Unfasten guide plate and turn it aside.
‹› Pressurized air hose remains connected.
-
Remove valve spring with valve spring plate.
-
Pull off valve stem seals with valve seal removal tool (3364).