TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-532004.png)
CAUTION!
The shaft seal - arrow - in the propshaft flange could be damaged. Press driveshaft horizontally as far back and to right side of vehicle as
possible.
-
Remove bolts - 1 - and - 2 - under the vehicle floor.
-
Remove cover from the oxygen sensor electrical connector bracket.
-
Remove bolt - 3 - and free up the electrical wire to the oxygen sensor.
-
Remove electrical connector for the oxygen sensor - arrow - from the bracket and disconnect it.
