TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Dashboard / Instrument Panel: Service and Repair
Instrument Panel Vent
Instrument Panel Vent
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
Removing
‹› Removal and installation on middle and sides is the same.
-
Turn rotary ring - 2 - from left stop out - alpha - = 45° to the right.
-
Using Trim Removal Wedge (3409), pry instrument panel vent - 1 - from instrument panel.
-
Remove instrument panel vent from instrument panel by hand.
Installation
Installation is reverse of removal, but note the following:
-
Rotary ring must be - alpha - = 45° to the right.
-
When sliding instrument panel vent into instrument panel, ensure guide - arrow B - engages in opening - arrow A -.
-
Press instrument panel vent into installation opening as far as stop.