TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Fluid - Differential: Service and Repair
Haldex Clutch Oil Level, Checking
Haldex Clutch Oil Level, Checking
‹› => [ Haldex Clutch Oil, Filling ] See: Haldex Clutch Oil, Filling
‹› => [ High Performance Haldex Clutch Oil, Changing ] See: High Performance Haldex Clutch Oil, Changing
CAUTION!
Different high performance oils for the Haldex clutch
‹› The rear final drives "02D/0AV" and "0BR" have different Haldex clutches with different oils.
‹› Both oils for the Haldex clutch must not be mixed together or interchanged.
‹› Refer to for the Haldex Clutch Oil part numbers.
‹› Be sure to note the differences in the rear final drives. Refer to => [ Rear Final Drive Identification ] See: Transmission and
Drivetrain/Differential Assembly/Application and ID/Rear Final Drive Identification
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
‹› Drip tray for VAS 6100 (VAS 6208)
‹› Vehicle Diagnostic, Testing, and Information System (VAS 5051B) and Vehicle Diagnostic and Service Information System (VAS 5052)
‹› 3m Diagnosis Lead (VAS 5051B/2) or 5m Diagnosis Lead (VAS 5051B/1)
Test Prerequisites
‹› The oil temperature must be between 20 °C/ 68 °F and 40 °C/ 104 °F.
‹› Oil temperature can be obtained by driving vehicle to warm it.
‹› Vehicle on a flat surface
‹› Final drive must be in installation position to check oil level.
CAUTION!
To prevent possible injury when performing measuring tests or test drives. Refer to => [ Audi TT Safety Precautions ] See: Transmission
and Drivetrain/Differential Assembly/Service Precautions/Audi TT Safety Precautions, => [ Audi A3 Safety Precautions ] See:
Transmission and Drivetrain/Differential Assembly/Service Precautions/Audi TT Safety Precautions.
-
With ignition switched off, connect Vehicle Diagnosis, Testing and Information System (VAS 5051B) to Data Link Connector (DLC).