TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Fluid - Transfer Case: Removal and Replacement
Bevel Box Sealing Ring, Replacing with Transmission Installed
Bevel Box Sealing Ring, Replacing with Transmission Installed
Special tools, testers and auxiliary items required
‹› Extractor lever (T20143/2)
‹› Drip tray for VAS 6100 (VAS 6208)
‹› Thrust piece (T10243)
-
Remove bevel gear transfer case => [ Bevel Box, Removing ] See: Bevel Box, Removing.
-
Place drip tray (VAS 6208) underneath.
-
Pry bevel box seal off with extractor lever ( T20143/2) or extractor lever (VW 681).
-
Fill space between sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).
-
Lightly oil new sealing ring on outer circumference.
-
Drive in seal until stop.
-
Install bevel box => [ Clutch Housing, Servicing ] .
-
Check gear oil level in manual transmission => [ Manual Transmission Gear Oil Level, Checking ] .