TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
21
Toothed Belt
‹› Before removing, mark direction of rotation using chalk or felt-tip marker
‹› Check for wear
‹› Removing. refer to => [ Toothed Belt ] See: Toothed Belt
‹› Installing (adjusting valve timing) => [ Installing and Adjusting Valve Timing ] See: Toothed Belt
22
Lower Toothed Belt Guard
23
Screws
‹› 7 pieces
‹› 9 Nm
24
Engine Support
25
Bolt
‹› Tightening specifications => [ (Item 4) Bolt ] See: Engine, Cooling and Exhaust/Engine/Service and Repair/Subframe Assembly Overview
Crankshaft Toothed Belt Sprocket, Removing and Installing
-
Use the counterholder (3415) to loosen or tighten the crankshaft toothed belt pulley bolt.
‹› Contact surface between toothed belt gear, diamond disc and crankshaft must be free of oil.
-
Place a new diamond disc between the toothed belt pulley and the crankshaft when installing.