TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
If any of the specifications are not obtained:
-
Replace the Leak Detection Pump (LDP) (-V144- ).
If the specified values are obtained:
Checking voltage supply
‹› The voltage for the Leak Detection Pump (LDP) (-V144- ) is supplied via the Fuse 7 (on fuse panel B) ( SB7).
-
Check the Leak Detection Pump (LDP) (-V144-) for voltage.
-
Using a multimeter, check the Leak Detection Pump (LDP) (-V144-) electrical harness connector terminal 3 and ground for voltage.
-
Operate the starter briefly.
Specified value: battery voltage.
-
Switch the ignition off.
If the specified value was not obtained: