TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Coolant Temperature Sensor/Switch (For Computer): Testing and Inspection
Engine Coolant Temperature Sensor, Checking
Engine Coolant Temperature Sensor, Checking
CAUTION!
‹› Cooling system is under pressure.
‹› Danger of scalding when opening!
Observe all safety precautions: => [ Safety Precautions ] See: Computers and Control Systems/Service Precautions/Safety Precautions
View clean working conditions: => [ Clean Working Conditions ] See: Computers and Control Systems/Service Precautions/Clean Working
Conditions
Prior to repair work, perform a preliminary check to verify the condition. Refer to => [ Preliminary Check ] See: Computers and Control
Systems/Testing and Inspection/Scan Tool Testing and Procedures/Preliminary Check.
Use only gold-plated terminals when servicing any component with gold-plated electrical harness connector terminals.
For wiring diagrams, component locations, and connector views, Refer to the applicable wiring diagram.
Special tools, testers and auxiliary items required
‹› Generic scan tool
‹› Multimeter
‹› Wiring diagram
Test requirements
‹› The Motronic Engine Control Module (ECM) (J623) fuses OK.
‹› Battery voltage at least 12.5 volts.
‹› All electrical consumers such as, lights and rear window defroster, switched off.
‹› Vehicles with automatic transmission, shift selector lever into position " P" or "N".
‹› A/C switched off.
‹› Ground (GND) connections between engine/transmission/chassis OK.
‹› Ignition switched off.
‹› Engine cold.