audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Intake Air Temperature Sensor|Testing and Inspection|Page 2075 > < Intake Air Temperature Sensor|Testing and Inspection|Page 2073
Page 3
background image

If any of the specified values are not obtained:

-

Replace the Intake Air Temperature (IAT) Sensor ( G42). 

°°Testing if display approx. -40 C or approx. -46 C:

-

Disconnect the Intake Air Temperature (IAT) Sensor (G42) electrical harness connector - 1 -.

-

Using a jumper wire, connect the Intake Air Temperature (IAT) Sensor (G42) electrical harness connector terminals 1 to 2.

-

 Check the value indicated on the scan tool display.

Intake Air Temperature Sensor|Testing and Inspection|Page 2075 > < Intake Air Temperature Sensor|Testing and Inspection|Page 2073