TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Insert valve - 1 - in new cover - 5 - and control module - 6 - and press onto connector.
-
Lightly coat new O-rings - 2 - and - 3 - with High Performance Haldex Clutch Oil.
-
Carefully position control module - A - and tighten bolts - arrows - to specified torque => [ (Item 2) Bolt, 6 Nm ] See: Rear Final Drive 02D and
0AV, AWD Control Module Assembly Overview.
-
Check oil level in Haldex clutch. Refer to => [ Haldex Clutch Oil Level, Checking ] See: Maintenance/Fluids/Fluid - Differential/Service and
Repair/Haldex Clutch Oil Level, Checking.