TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Remove connector - 3 -.
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
CAUTION!
‹› Observe safety precautions for work on airbags. Refer to => [ Airbag System General Safety Precautions ] See: Service Precautions.
‹› Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity". This
can be done by touching door striker, for example.
‹› Ensure that electrical connections are pushed in as far as stop and engage with a click.
-
Install driver side airbag unit.