TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Air Bag: Service and Repair
Passenger Side Airbag Unit
Passenger Side Airbag Unit
Removing
CAUTION!
‹› Observe safety precautions for work on airbags. Refer to => [ Airbag System General Safety Precautions ] See: Service Precautions.
‹› Note assignment of airbag unit to instrument panel.
-
Switch off ignition.
-
Disconnect battery ground wire.
-
Remove glove compartment. Refer to => [ Glove Compartment ] See: Body and Frame/Interior Moulding / Trim/Utility Storage
Compartment/Service and Repair.
CAUTION!
Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity". This can
be done by touching door striker, for example.
-
Disconnect the connector - 1 -.
-
Press securing catch - 1 - in - direction of arrow - until connector disengages.
-
Remove electrical connector - 2 -.