TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
3
Bolt
‹› Tightening specification, refer to => [ Backrest Frame and Panel Assembly Overview ]
‹› Quantity: 16
4
Backrest Frame
‹› To replace backrest frame, remove left and right backrest shell
‹› Assembly overview, refer to => [ Backrest Frame and Panel Assembly Overview ]
‹› Removing and Installing, refer to => [ Backrest Frame ]
‹› Optional equipment:
‹› With child seat anchor (LATCH)
‹› Without child seat anchor
5
Double Sided Adhesive Tape
‹› Attach to front side and upper edge of backrest shell
LATCH Child Seat Anchorage, Removing and Installing
The child seat anchor (LATCH) is welded to the backrest frame. To remove and install the child seat anchor, backrest frame must be removed and
replaced.
Child seat anchor (LATCH), removing and installing, refer to => [ Backrest Frame and Panel Assembly Overview ]