TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Seat Belt: Service and Repair
Belt Guide Anchorage Point
Belt Guide Anchorage Point
Removing
-
Remove belt anchor from outer floor assembly anchorage point. See: Outer Floor Assembly Anchorage Point
-
Remove rear bulkhead cover. Refer to => [ Rear Bulkhead Cover ] See: Body and Frame/Interior Moulding / Trim/Service and Repair/Removal
and Replacement.
-
Remove bolts - 2 - and remove belt guide - 1 -.
-
Thread belt webbing - 3 - out of belt guide - 2 -.
Installation
To install, perform the steps used in removal in reverse order.
Tightening specifications, refer to=> [ Three-Point Seat Belt Assembly Overview ] See: .