TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Seat Belt: Service and Repair
Outer Floor Assembly Anchorage Point
Outer Floor Assembly Anchorage Point
Removing
-
Move seat forward and fold backrest forward.
-
Open cover plate - 2 - by pulling in - direction of arrow -.
-
Remove cover - 2 - upward out of floor covering.
-
Remove bolt - 1 -.
Installation
-
Install bolt - 1 -.
-
When installing, slide tab - 4 - under floor covering.
-
Press tabs - 3 - under floor covering by closing cover - 2 -.
Tightening specifications, refer to => [ Three-Point Seat Belt Assembly Overview ] See: .