TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
1
Seat Occupied Recognition Control Module (J706 )
‹› Must not be disconnected and replaced separately under any circumstances
‹› Replacing is only possible with the entire service kit. Refer to => [ Passenger Occupant Detection System ] See:
2
Bolt
‹› 2.5 Nm
‹› Quantity: 2
3
Connector on Seat Occupied Recognition Control Module (J706)
‹› Must not be separated under any circumstances.
4
Seat Occupied Recognition Pressure Sensor (G452 )
‹› Must not be disconnected and replaced separately under any circumstances
‹› Replacing is only possible with the entire service kit. Refer to => [ Passenger Occupant Detection System ] See:
5
Pressure Hose
6
Connector Between Service Kit And Seat Wiring Harness
7
Connector on Seat Occupied Recognition Pressure Sensor (G452)
‹› Must not be separated under any circumstances.