TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-153001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
Charge Air Pressure Sensor
Removing
-
Disconnect electrical connector - 2 -.
-
Remove bolts - 1 - and charge air pressure sensor.
Installing
‹› For tightening specifications, refer to => [ Wastegate Bypass Regulator and Recirculating Valve Overview ] See: Powertrain Management/Fuel
Delivery and Air Induction/Turbocharger/Wastegate Actuator/Service and Repair/Wastegate Bypass Regulator and Recirculating Valve Overview.
Installation is in reverse order of removal.