TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Slide fiber optic cable - 1 - into cutting point.
‹› Insulation must make contact with cutting point stop - arrow -.
-
Close Pliers For Fiber Optic Conductor (VAS 6223/1 ).
-
Press cutting unit - arrow - down.
-
Open Pliers For Fiber Optic Conductor (VAS 6223/1 ) and remove fiber-optic cable - 1 -.
‹› Fiber optic cable is only to be placed on an absolutely clean surface.
Activating transportation safeguard