TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Slide the small yellow crimp connector onto both stripped, uninsulated wire ends on the vehicle-specific single wire and crimp them using crimp
pliers.
‹› Do not crimp wire insulation.
After crimping, crimp connections must be heat-shrunk using hot air gun to prevent moisture penetration.
-
Put Shrink Tip For Hot Air Gun (VAS 1978/15) on to Hot Air Gun, 220 V/ 50 Hz (VAS 1978/14).
CAUTION!
Risk of damaging surrounding components.