TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
‹› This is how the completed repair location with the inserted wire and two crimp connectors should look.
‹› Make sure that crimp connections do not lie directly next to each other when several wires need to be repaired. Arrange the crimp connectors at a
slight offset so that the circumference of the wiring harness does not become too large.
‹› If the repair point was previous taped, this point must be taped again with yellow insulating tape after repairs.
‹› Secure the repaired wiring harness if necessary with a cable tie to prevent flapping noises while driving.