TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
First turn steering toward right in direction of travel until it stops.
-
Now turn steering uniformly toward left until it stops on friction meter, for example (VAS 6222). Read off steering torque while doing this.
Specified value: 3 ± 2 Nm
1
Friction meter, for example (VAS 6222 )
2
24 mm socket
-
Remove clamp for boot at left - 1 - and pull off boot from steering gear housing.
-
Turn steering into straight ahead position using (T10304 ).
For this purpose, dimension - a - = 25.5 mm.
-
Rotate steering gear in mounting bracket so that thrust piece with adjustment screw points upward.
-
Now slide boot onto steering gear cover again.
-
Drill out the 6 peenings using a 4 mm dia. drill bit until dimension - a - has been reached.