TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-877007.png)
CAUTION!
Risk of damaging threads in transmission support by inserting bolts crooked.
‹› Before installing bolts - arrows -, transmission support and transmission mount support arm must be absolutely parallel to each other. If
necessary, raise rear of transmission with trolley jack.
-
Adjust subframe mount. Refer to => Engine Mechanical
10 Removal and Installation.
-
Install transmission mount support arm on transmission support.
-
Remove engine support bridge (10 - 222 A) from engine.