TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
‹› If oil gets on the crossmember or enters the perforations in the crossmember, it must be carefully removed.
Oil Level, Checking
-
Place Drip tray for VAS 6100 (VAS 6208) under final drive.
-
Remove oil level inspection plug - arrow -. (Shown with final drive removed for the sake of a better illustration).
Oil level is correct if Haldex clutch is filled to lower edge of oil filler hole or up to 3 mm below oil filler hole.
-
If necessary, top off High Performance Haldex Clutch Oil => [ Haldex Clutch Oil, Filling ] See: Haldex Clutch Oil, Filling
Tightening Specifications