TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
‹› All driveshaft bolts are tightened.
-
Align the intermediate bearing in its elongated holes so the driveshaft or bearing is not under stress.
-
Tighten combi-bolt - 1 -. The combi-bolts - 1 - must lie inside the four heat shield centering tabs - 2 -. Tightening specification
-
Tighten pendulum support first to transmission - arrows B and C - and then to subframe - arrow A -.
-
Reconnect exhaust system and ensure it is not under stress. Refer to => Engine Mechanical 26 Description and Operation