TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Install right drive axle on transmission => Suspension,
Wheels, Steering 40 Removal and Installation.
-
Press engine/transmission assembly to bulkhead; while doing so, carefully guide bevel box pin into flange/driveshaft.
‹› Seal in driveshaft flange must not be damaged when removing and installing transmission. Replace driveshaft if damaged.
‹› Slip driveshaft horizontally onto guide pin.
-
Attach driveshaft with flexible disc to bevel box flange - arrows - => Rear Final Drive 39 Removal and Installation.
-
Install subframe.