TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
A Insert nut M 12 x 10 (qty. 4) between bevel box and transmission holder.
-
Then align bevel box to remaining 3 holes and secure.
-
Place drip tray underneath.
-
Drain oil from bevel box.
-
Secure bevel box output flange with stop plate (T10108/1 ) and install bolts M 10 x 30 - arrows -.
-
Remove hex nut for output flange.
A Socket attachment SW 36 for 3/4 inch drive
-
Pivot bevel box so that output shaft faces upward.
-
Remove output shaft from bevel box shaft bevel gear.