V8 Quattro V8-3562cc 3.6L DOHC (PT) (1990)
Note:
For deep stone chips, it may be necessary to apply color a second or third time. If so, then apply second and third coats at 5 minute intervals.
Allow repaired surface to dry for minimum 10 minutes and maximum of 30 minutes.
Step 3. - Applying Repair Finish to repairs
-
Fold a clean MULTI WIPE (twice) around the plastic applicator (included in kit).
Note:
MULTI WIPE cloth may be cut in half to minimize waste.
-
At the same time, ready the polishing block by, wrapping the block (once) with a clean MULTI WIPE.
Once applicator and polishing block have been prepared (wrapped with MULTI WIPES):