1 Series E81 120i (N43) 3-door
Release screw (1).
Tightening torque 32 41 1AZ
.
Note:
If necessary, raise and/or turn fluid reservoir in order to gain better
access to hose clamps.
Remove hose clamps if necessary with special tool 32 1 260 .
Disconnect suction line and radiator return line from fluid reservoir.
Lift out fluid reservoir.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Removing and installing/replacing fluid reservoir for power steering
BMW AG - TIS
20.01.2013 05:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
