1 Series E81 120i (N43) 3-door
41 33 040
Replacing front wall
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 33 040).
Necessary preliminary tasks:
•
Remove carrier for bumper trim
Important!
Car must not be driven without the front wall.
Driving without the front wall may damage the body structure.
Following new body parts are required (refer to EPC):
-
(1) Front panel
-
(2) Headlight holder, left
-
(3) Headlight holder, right
Carry over the following work steps symmetrically to the other side
of the car.
Note:
View, front side panel, in direction of travel
Release screws (1).
Tightening torque 41 33 3AZ
.
Installation:
Plastic tabs (3) on headlight holder (2) must not be damaged.
RA Replacing front wall
BMW AG - TIS
20.01.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -