1 Series E81 120i (N43) 3-door
51 48 ...
Removing and installing/replacing sound
insulation on cowl panel/windscreen
Note:
Sound insulation is only fitted in vehicles with diesel engines.
Sound insulation can only be replaced with the following removed:
-
Instrument panel or
-
Windscreen
Important!
Press down expanding foam tape (5) shortly before installing
windscreen (2) (with hand roller) or stick on if replacing.
Relaxed expanding foam tape could crush cement bead (3)
(leaks, wind noises).
Replacement:
Stick new expanding foam tape (5) on sound insulation (7)
along press-down elements (6).
Expanding foam tape (5) may only be stuck up to corner point of
sound insulation (7).
1
Dashboard trim panel
2
Windshield
3
Glue bead
4
Retaining strip, bottom
5
Expanding foam tape (sound insulation, cowl panel)
6
Press-down elements for (7)
7
Sound insulation, bulkhead upper section
8
Side frame
RA Removing and installing/replacing sound insulation on cowl panel/windscreen
BMW AG - TIS
20.01.2013 07:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -