1 Series E81 120i (N43) 3-door
Press cable retaining plate (1) downwards to gain access to
controller from below.
Important!
Sharp edges on centre console and on cable ties may cause
injury.
Carry out this operation with care.
Insert hand between cable retaining plate (3) and centre
console (2).
Press controller (1) upwards out of catch.
Disconnect associated plug connection and remove
controller (1).
Release screws (1) and remove controller (2) from trim (3).
Installation:
Retainers (1) of controller (2) must not be damaged or missing.
RA Removing and installing (replacing) front controller
BMW AG - TIS
20.01.2013 09:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -