1 Series E81 120i (N46T) 3-door
4-hole:
Installation:
Fit vibration damper (1) on crankshaft hub, insert and tighten
down screws.
Release bolts and remove vibration damper (1).
Tightening torque, 11 23 1AZ
.
Assemble engine.
RA Removing and installing or replacing vibration damper (N46T)
BMW AG - TIS
20.01.2013 19:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
