1 Series E81 120i (N46T) 3-door
Hexagon socket screw (1) is used for gripping.
Release three screws on belt pulley (2).
Unlock and detach coolant hoses (1 to 3).
Note:
Hoses of power steering pump remain connected.
Note:
Water pump is secured by two screws (1) to power steering pump.
Release screws (1).
Tightening torque: 11 51 2AZ .
Release screws and remove power steering pump with water
pump from engine block.
Tightening torque: 11 51 1AZ
.
RA Removing and installing/replacing water pump (N46T)
BMW AG - TIS
20.01.2013 19:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -