1 Series E81 120i (N46T) 3-door
Note:
Locking pins (1) or locking hooks of special tool 21 2 190 must
engage in openings in SAC clutch.
Set SAC clutch (1) down on a clean surface.
Install special tool 21 2 190 in SAC clutch (1).
Note:
Insert special tool 21 2 170 only in area of bores for dowel pins.
Fit special tool 21 2 170 and tighten down at knurled screw (1).
RA Removing and installing/replacing clutch (SAC 228 N45/N46/N45T/N43/N46T)
BMW AG - TIS
20.01.2013 19:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -