1 Series E81 120i (N46T) 3-door
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Release nuts (2) and remove clutch slave cylinder (1).
Tightening torque: 21 52 5AZ
.
Detach locking clip.
Pull shift rod (1) out of shift rod joint (2).
Installation:
Grease shift rod pin (3).
Grease,
refer to BMW Service Operating Fluids.
Unlock bearing pin (1) in direction of arrow and remove.
RA Removing and installing transmission (GS6-17BG)
BMW AG - TIS
20.01.2013 20:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -