1 Series E81 123d (N47S) 3-door
12 21 520
Replacing glow control unit (N47)
Necessary preliminary tasks:
•
Switch off ignition
•
Remove acoustic cover
Note:
Installation location: on intake air manifold, bottom.
Disconnect plug (1) from temperature sensor
Disconnect pressure pipe from throttle valve
Detach plug (2) from glow control unit. Remove glow control unit.
RA Replacing glow control unit (N47)
BMW AG - TIS
21.01.2013 12:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -