1 Series E81 130i (N52K) 3-door
11 22 500
Removing and installing/replacing flywheel
(N52K)
Special tools required:
•
11 4 180
•
11 9 260
•
11 9 265
Important!
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Necessary preliminary tasks:
•
Remove transmission
•
Remove clutch
For vehicles with optional extra SA205 (automatic transmission):
Secure flywheel (1) with existing transmission bolt (2) and
special tool 11 9 260 .
Installation:
Replace aluminium screws.
Unfasten flywheel screws.
Tightening torque 11 22 1AZ
.
Installation:
Flywheel (1) is secured with an alignment pin.
RA Removing and installing/replacing flywheel (N52K)
BMW AG - TIS
22.01.2013 03:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
