1 Series E81 130i (N52K) 3-door
Remove protective cap from compressed air valve.
Connect compressed air line (1) to compressed air valve.
Blow fuel back into tank with a short blast of compressed air (max.
3 bar).
Unlock and detach fuel line (1).
Detach connector strip (2) in direction of arrow.
Release screws.
Tightening torque 13 53 1AZ
.
Remove injection pipe (3).
Seal fuel hose with special tool 13 5 281 .
RA Replacing complete injection pipe (N52/ N52K)
BMW AG - TIS
22.01.2013 03:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
