1 Series E81 130i (N52K) 3-door
Set SAC clutch (1) down on a clean surface.
Install special tool 21 2 180 in SAC clutch (1).
Note:
Locking hooks (1) of special tool 21 2 180 must engage in
openings in SAC clutch.
Press special tool 21 2 180 together at handles (1) as far as it
will go and grip firmly.
At same time tighten down knurled screws (2).
Adjustment ring of SAC clutch is now secured in its original
position (wear position).
Important!
Do not reset adjustment ring to new position.
Note:
Insert special tool 21 2 170 only in area of bores for dowel pins.
RA Removing and installing or replacing clutch (SAC 228)
BMW AG - TIS
22.01.2013 04:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
