1 Series E81 130i (N52K) 3-door
Release knurled screw (1) and remove special tool 21 2 170
from SAC clutch.
Release knurled screws (2) and remove special tool 21 2 180
from SAC clutch.
Withdraw special tool from clutch plate with aid of accompanying
screw (1).
Installing new SAC clutch:
Installation:
N52
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
RA Removing and installing or replacing clutch (SAC 228)
BMW AG - TIS
22.01.2013 04:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -