1 Series E81 130i (N52K) 3-door
Grip clamping sleeve (1).
Loosen nut (2).
Detach retainer (3) downwards using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever.
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
Release nut (1) and bracket from transmission oil lines on oil
sump.
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132
and 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
RA Removing and installing automatic transmission (GA6L45R)
BMW AG - TIS
22.01.2013 04:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -