1 Series E81 130i (N52K) 3-door
25 11 250
Removing and installing/replacing vibration
damper
Necessary preliminary tasks:
•
Remove shift lever cover.
•
Remove shift lever knob.
Open clamp (1) on vibration damper with pliers.
Unlock vibration damper with screwdriver (2) (there is a locking
notch on one side only).
Lift out vibration damper.
Installation:
In the case of a new vibration damper which has been attachment
to the shift lever, only the retainer (1) still needs to be unlocked.
Make sure the vibration damper is correctly engaged in the shift
lever.
RA Removing and installing/replacing vibration damper
BMW AG - TIS
22.01.2013 04:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -