1 Series E81 130i (N52K) 3-door
31 21 180
Removing and installing/replacing bearing for
front wheel
Necessary preliminary tasks:
•
Remove brake disk
Release screws (1).
Press wheel bearing (2) off swivel bearing with a suitable tool.
Installation:
Replace microencapsulated screws.
Tightening torque 31 21 1AZ
.
Installation:
When reusing, recut all the threads in the wheel bearing.
Keep contact surface (1) of swivel bearing and wheel bearing
clean and free from oil and grease.
RA Removing and installing/replacing bearing for front wheel
BMW AG - TIS
22.01.2013 04:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
