1 Series E81 130i (N52K) 3-door
34 33 071
Replacing vacuum hose for brake booster
(N52 on brake booster)
Necessary preliminary tasks:
•
Read and comply with General Information.
•
Remove lower section of microfilter housing
Important!
Before beginning work, fully press the brake pedal several
times to reduce the vacuum pressure in the brake booster.
Unlock quick-release fastener (1) and pull out vacuum line (2).
Unfasten hose clip (1).
Installation:
Replace hose clip.
Pull off vacuum hose (2).
Unclip vacuum line (4) from fixture (3) and feed out.
RA Replacing vacuum hose for brake booster (N52 on brake booster)
BMW AG - TIS
22.01.2013 06:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
